Turbine gas meter TRZ 03
Our workhorse.
The TRZ03 series is an excellent representation of a proven and mature technology that is widely used throughout the natural gas industry due to its good price-performance ratio. The first generation was approved by PTB in 1993. Since then the meters have always exceeded the requirements of the relevant international standards. The TRZ03 is used both in the pipeline networks of the transport companies (TSOs) and in the transfer stations of the distribution network operators (DSOs) when high measuring accuracy for custody transfer operation, short inlet distances, robust and low-maintenance devices are required. In addition to the classic mechanical roller counter and the electrical pulse outputs, the meter can optionally be equipped with an encoder for serial transmission of the meter reading.
Roller counter, which registers the total volume and displays it at any time without a power supply
Horizontal or vertical gas flow
DIN-DVGW tested and PTB approved
High measuring accuracy
Optionally with mechanical output clutch
Device for measuring gas volume in fiscal metering
Apparatus for measuring the volume of gas in legal metrology
- Suitable for gases according to DVGW worksheet G-260 and neutral, non-aggressive gases, other gases on request
- Special design for aggressive gases is possible
- Roller counter, which registers the total volume and displays it at any time without a power supply
- High measuring accuracy
- Horizontal or vertical gas flow
- Optionally with mechanical output clutch
- TRZ 03E without mechanical counter, with electronic tap for computer systems
- DIN-DVGW tested and PTB approved
| Turbinenradgaszähler TRZ 03 | |
|---|---|
| Max. permissible pressure PS | = 100 bar |
| Max. Operating pressure pmax | up to 100 bar |
| Meter size | G 65 to G 16000 (from Qmax 100 m³/h to Qmax 25000 m³/h) |
| Measuring range max. | 1 : 50 |
| Connection | DIN-Flansch PN 10, PN 16, PN 25, PN 40, PN 100 und Flansch nach ANSI 150, ANSI 300, ANSI 600 in DN 50, DN 80, DN 100, DN 150, DN 200, DN 250, DN 300, DN 400, DN 500, DN 600 |
| Lorem | Lipsum |
Size and performance data
| Meter size | Nominal diameter DN | Overall length (flange to flange) in mm | Max. Max. operating pressure pmax in bar
| Max. Flow rate Qmax in m³/h
|
|---|---|---|---|---|
G 65 | 50 | 150 | 100 | 100 |
G 100 | 80 | 240 | 100 | 160 |
G 160 | 80 100 | 240 300 | 100 | 250 |
G 250 | 80 | 240 300 | 100 | 400 |
G 400 | 100 150 | 300 450 | 100 | 650 |
G 650 | 150 | 450 | 100 | 1000 |
G 1000 | 150 200 | 450 600 | 100 | 1600 |
G 1600 | 200 250 | 600 750 | 100 | 2500 |
G 2500 | 250 300 | 750 900 | 100 | 4000 |
G 4000 | 300 400 | 900 1200 | 100 | 6500 |
G 6500 | 400 500 | 1200 1500 | 100 | 10000 |
G 10000 | 500 600 | 1500 1800 | 100 | 16000 |
G 16000 | 600 | 1800 | 100 | 25000 |
| Lorem | Lipsum |
Technical Product Information & Software
TRZ 03 EN
Product Information, PDF (2mb)
EU-DoC-TRZ-03-2024-09-30
Declaration of Conformity, PDF (661 kb)
Operating & maintenance instructions
TRZ 03 EN
Manual, PDF (6.6 mb)
If you have any questions:
Turbine Gas Meter TRZ 03
Please contact us if you have any questions or need help. Our employees are always there for you.